limitek

Plastic recoil housing Nitro Star Engines sticker on recoil housing Silicone tubing used to protect the starter robe at housing Uses a 14mm hex one-way.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • This Part Fits the following kits / parts: • • #15107 - NITRO STAR T3.0 ENGINE WITH PULLSTART 6.5mm Rotary Carb./ABC/Standard Shaft/Side Exhaust/Heatsink Head/Black Crank Case Powering the RTR NITRO RS4 3 EVO+, the T3.0 is HPI's a fantastic engine for speed fanatics! With 3cc of displacement for an impressive 0.18 cubic inches, this is an easy upgrade for just about every on-road racer!

Glow Plug: Cold R5 (HPI ) Displacement: 3.01cc Boar: 16.8mm Stroke: 13.6mm Power: 2. How To Install Themes In Phpfox here. 2hp @ 31,000 RPM Maximum RPM: 32,000 RPM Carburettor: F2-6.5 (Composite 6.5mm) This engine is supplied with a pullstarter. If you prefer to use a Roto Start with this engine, you will need Roto Start 2 Set and a standard 7.2 volt stick pack battery.

A variety of race-tuned standard features will make the T3.0 your engine of choice. The finned crank case helps keep everything running at the right temperature, and the tall finned aluminium cooling head further reduces operating temp for optimum efficiency. With ABC construction (Aluminium piston, Brass cylinder liner sleeve, Chrome-plated liner) you get the benefit of decades of 2-stroke racing technology. The composite carb keeps needle tuning consistent as the engine heats up, and the wide 6.5mm opening ensures a good supply of fuel to the combustion chamber. All of this adds up to a fantastic engine that is solid, fast and easy to use!

When you need to go all out to get maximum speed, you can depend on the HPI Nitro Star T3.0! Please see our to find the right Roto Start system for this engine. Instructions • • Share • • •.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • This Part Fits the following kits / parts: • • #15107 - NITRO STAR T3.0 ENGINE WITH PULLSTART 6.5mm Rotary Carb./ABC/Standard Shaft/Side Exhaust/Heatsink Head/Black Crank Case Powering the RTR NITRO RS4 3 EVO+, the T3.0 is HPI's a fantastic engine for speed fanatics! With 3cc of displacement for an impressive 0.18 cubic inches, this is an easy upgrade for just about every on-road racer! Glow Plug: Cold R5 (HPI ) Displacement: 3.01cc Boar: 16.8mm Stroke: 13.6mm Power: 2.2hp @ 31,000 RPM Maximum RPM: 32,000 RPM Carburettor: F2-6.5 (Composite 6.5mm) This engine is supplied with a pullstarter. If you prefer to use a Roto Start with this engine, you will need Roto Start 2 Set and a standard 7.2 volt stick pack battery.